Drop ceiling tile over a workstation row is sagging or stained
For sound structural recovery, a sagging tile is holding water and can drop without warning, so removal is a crew task.
Homes and commercial properties
Nationwide
Our building recovery team removes water from offices, protects furniture and equipment, and dries work areas with attention to business continuity.
Signs to look for
As materials are evaluated, if you notice any of these problems, call us before water has more time to spread into nearby materials.
For sound structural recovery, a sagging tile is holding water and can drop without warning, so removal is a crew task.
From the building building assessment, carpet tile is held by a release adhesive that softens when it stays wet.
As materials are evaluated, fabric wrapped panels wick upward from the floor and the core behind the fabric holds it.
From the building building assessment, floor boxes carry live power and data, so nobody should open one.
From the building building assessment, paper wicks fast and swells, and a bottom row can pull water several inches up the box.
Across the affected building area, a UPS, meaning an uninterruptible power supply, keeps the equipment plugged into it live even after the panel is off, so treat the rack as energized until your engineer confirms otherwise.
What happens
Our building recovery team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
For sound structural recovery, power to the affected area goes off through your building engineer or electrician first.
Computers, a network switch, a patch panel and anything on a server rack stay off and get lifted clear of the floor by our building recovery team.
Across the affected building area, a moisture meter reads the wall bases, the slab and the panel cores, and a thermal imaging camera shows the pattern above the ceiling.
For sound structural recovery, wet files are sorted by how much they matter and how wet they are, then boxed flat and staged out of the humid air.
Across the affected building area, tiles come up in numbered runs, get cleaned and dried off the slab, then go back once the concrete reads dry.
From the building building assessment, panels are lifted off the floor, fabric is cleaned and the core is metered from the bottom edge.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
For sound structural recovery, here is how we usually handle office water cleanup near the United States.
For sound structural recovery, offices stack, so the tenant above and the tenant below both matter.
Your callFor sound structural recovery, do not power anything on and do not let staff carry a computer out of the wet area.
+10 minutesFrom the building building assessment, your building engineer kills power to the area and finds the shut off.
+30 minutesFrom the building assessment, we walk it with your facilities manager, meter everything, and mark the wet area on your floor plan.
On arrivalFrom the building building assessment, the wet work runs after hours where you want it to, so desks are not being moved around your staff.
First eveningFor sound structural recovery, numbered tile runs come up, wet ceiling tile is removed by crew, and the zip wall goes in.
Day 1 to 2From the building building assessment, we take daily readings at the slab, the wall bases and the panel cores, and shift equipment as the map shrinks.
Day 2 to 5Understanding the cost
As materials are evaluated, we explain the recommended work and price before you approve the job. As materials are evaluated, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Single office suite, clean water, one or two rooms | From the building assessment, national estimate. From the building assessment, extraction, carpet tile lift and relay, and three to four days of drying. | $1,500 to $5,000 |
| Several suites or about half a floor, clean water, three to five days of drying | From the building assessment, national estimate. As materials are evaluated, includes sealed work area, ceiling tile removal and after hours extraction. | $6,000 to $20,000 |
| Office cleanup priced by affected area, clean water | From the building assessment, national estimate. From the building assessment, the commercial band, and the usual way office work scales once more than one suite is wet. | $4 to $9 per square foot |
| Office cleanup priced by affected area, contaminated water | From the building assessment, national estimate. For sound structural recovery, applies where a drain or sewer backup reached the suite. | $9 to $18 per square foot |
| Carpet tile lifted, cleaned, dried and relaid | From the building assessment, national estimate. From the building assessment, cheaper than replacement whenever the tiles themselves are sound. | $2 to $5 per square foot |
| Server closet or IT room drying with sealed work area | From the building assessment, national estimate. As materials are evaluated, hand work around live equipment and very low humidity air. | $1,500 to $6,000 |
| Workstation cleaning and drying, per workstation | From the building assessment, national estimate. From the building assessment, panels, worksurface and pedestal file handled as one unit. | $75 to $250 |
| Wet record handling and prioritized boxing, per box | From the building assessment, national estimate for handling and boxing only. | $30 to $75 |
| After hours or overnight dispatch charge | From the building assessment, national estimate. For sound structural recovery, common on office work because most of it happens outside trading hours. | $100 to $400 |
Affected floor area, set by meter
Construction-aware scope is the wet area on the floor plan, not the size of the visible puddle. That footprint drives both labor hours and equipment counts.
Business hours versus after hours work
As materials are evaluated, evening and weekend crews cost more per hour, and calling a crew out beyond normal hours adds a national dispatch charge of $100 to $400.
Carpet tile versus glue down broadloom
For sound structural recovery, carpet tile can often be lifted, cleaned, dried and relaid, which is cheaper than replacement.
Whether IT space is involved
For sound structural recovery, a server closet needs sealed work area, low humidity air and careful hand work around a live rack.
Volume of wet paper records
For sound structural recovery, boxing, staging and inventorying files is labor, and anything sent for vacuum freeze drying is priced separately.
Workstation count in the wet zone
As materials are evaluated, each workstation means panels lifted, a worksurface checked and a pedestal file emptied.
Why timing matters
For sound structural recovery, water can keep moving into nearby materials even when the surface looks dry.
For sound structural recovery, water plus power drives corrosion across a board in seconds, and it voids the honest option of cleaning and testing.
Across the affected building area, wet paper swells, ink bleeds and pages fuse into blocks that cannot be separated later.
Across the affected building area, moisture trapped between tile and slab softens the release adhesive and telegraphs every seam.
As materials are evaluated, the core behind the fabric dries far slower than the surface, so odor returns whenever the floor gets humid.
Helpful service information
From the building assessment, start with the short explanation. For sound structural recovery, open a card if you want a little more detail.
Across the affected building area, modular tiles sit on a release adhesive, so they can be lifted in numbered runs, cleaned, dried off the slab and relaid.
For sound structural recovery, carpet tile is the reason office drying is often cheaper than people expect. Across the affected building area, modular tiles sit on a release adhesive, so they can be lifted in numbered runs, cleaned, dried off the slab and relaid.
Across the affected building area, the myth is that anything that got damp is finished.
Across the affected building area, wet electronics have an honest answer and a myth. Across the affected building area, the myth is that anything that got damp is finished.
For sound structural recovery, wet files swell, water soluble ink bleeds, and coated pages fuse into blocks that nobody can separate afterwards.
As materials are evaluated, paper is the material with the shortest clock in an office. For sound structural recovery, wet files swell, water soluble ink bleeds, and coated pages fuse into blocks that nobody can separate afterwards.
Help near you
Choose your area below, or call (877) 361-7453 and describe what happened.
You may also need
Our building recovery team removes water from offices, retail spaces, facilities, and other businesses while prioritizing safety and operational continuity.
Get a Quote: (877) 361-7453Our building recovery team uses high-capacity extraction to remove water from large commercial floors, carpets, and work areas efficiently.
Get a Quote: (877) 361-7453Our building recovery team stabilizes and dries wet documents, files, photographs, and records using methods selected for the material and damage level.
Get a Quote: (877) 361-7453Our building recovery team extracts water from carpet and padding, treats affected areas, and determines whether the flooring can be safely restored.
Get a Quote: (877) 361-7453Our building recovery team locates the source, removes unsafe wet ceiling materials, and dries the cavity to prevent additional sagging and damage.
Get a Quote: (877) 361-7453Our building recovery team removes water from clogged or failed AC drain systems and dries nearby walls, flooring, and insulation.
Get a Quote: (877) 361-7453Our building recovery team removes moisture from the air and wet materials, helping walls, flooring, and framing dry more evenly and completely.
Get a Quote: (877) 361-7453Our building recovery team tracks moisture readings during drying and adjusts equipment when needed so wet materials continue moving toward a verified dry condition.
Get a Quote: (877) 361-7453Common questions
Across the affected building area, as national estimates, one or two rooms of clean water commonly runs $1,500 to $5,000.
For sound structural recovery, usually yes, on part of the floor. For sound structural recovery, we contain the wet zone with zip walls, run air scrubbers inside it, and agree a temporary seating plan with your facilities manager.
For sound structural recovery, sometimes, but only if nobody powers them on. Across the affected building area, water plus power drives corrosion immediately and removes the option.
Across the affected building area, treat it as live until your building engineer says otherwise. As materials are evaluated, a UPS or battery backup keeps the equipment plugged into it live even after the panel is off, so the rack stays energized until your engineer confirms otherwise.
For sound structural recovery, often yes, provided they are handled on the day it happens. From the building building assessment, we sort by priority, box them flat, and get them out of humid air fast.
From the building building assessment, where the slab under it is wet, yes. From the building building assessment, tiles come up in numbered runs, get cleaned and dried off the floor, then go back down.
From the building building assessment, yes, and on office jobs it is often the better plan. Across the affected building area, extraction, tile lifting and ceiling work are disruptive, so we schedule them when the floor is empty.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Identify your state to reach building recovery building assessment, extraction, cleanup, and drying service in your area.
View the area on Google Maps